Blatter & Blatter have been producing high quality pipes in Montreal since 1907, established in that city only a year after Brigham set up shop in Toronto. I’ve wanted to work on a Blatter pipe for some time, so when this Red Dot Lovat came up on eBay, I snapped it up. It was listed in used, estate condition, but when it arrived it became obvious that the pipe had been smoked no more than a few times.
The rim showed a very light haze of lava, but the walls of the tobacco chamber were without cake. In fact, the factory bowl coating was in nearly perfect condition. The stummel was likewise in excellent condition, without dents or dings. The slightly flared saddle stem was without tooth chatter. Even the aluminum stinger was shiny as new when I removed the stem for inspection.
The pipe is stamped only with “Blatter” in script over “Montreal” in block lettering on the left shank. The stem is inlaid with a single red dot, indicating a machine-made pipe (Blatter hand made pipes are marked with two red dots). There is no shape number.
Apart from the light signs of use, one flaw caught my eye – a small fill on the left shank had shrunk and left a depression in the briar.
There was no cake in the chamber to ream, so I started this clean-up by wiping away the tobacco residue from the rim with a cotton pad dipped in alcohol. The old wax finish came off with a scrub with Murphy’s Oil Soap.
An experimental pipe cleaner dipped in alcohol came out of the stem completely clean, as I had expected. The shank and airway of the stummel were similarly spotless.
With the wax coat gone, the shrunken fill really stood out against the honey-brown briar finish. I picked the remaining putty from the fill and replaced it with a dab of CA glue mixed with briar dust.
I let the CA cure before filing and sanding the new fill smooth. Micromesh pads in 1500-3600 grits removed the sanding marks and a quick scribble from my lightest stain pen blended the repair into the existing finish. I forgot to take pics during this process (it only took 10 minutes or so), but these shots show the fill before and after the job was complete.
The stem needed nothing in the way of repairs, so I took both stem and stummel to the buffer for a quick polishing with White Diamond compound and several coats of Carnauba wax to protect the finish.
This Blatter Red Dot Lovat is ready to carry on where it left off after its long-past inaugural (and likely only) smoke. It is a larger pipe, just shy of 6″in length, with a thick-walled chamber drilled to just shy of 1.75″ x 0.75″ – lots of room for a favourite blend here!
Weighing in at 52 grams, this Lovat is a bit heavy for clenching and is better suited to a piper who likes to hold the pipe in his hand; indeed, the girthy bowl is particularly tactile and the flat underside of the round shank allows the pipe to sit securely on the table, perhaps next to an ashtray or fine beverage.
This classic Blatter Lovat is already on its way to a new piper who is sure to enjoy it for years to come.
Thanks for looking and until next time, Happy Piping!
As the owner of several Blatter pipes I can testify that they are one of the most underrated and little talked about pipe makers in the community. Good job freshening the pipe up Charles, I look forward to displaying it in my collection. Cheers, Adam.
LikeLiked by 1 person
Nice find,I dont think they did many classic shapes? A nice grain on that one.
LikeLiked by 1 person
Thanks Al. I think their factory pipe series is predominantly classic shapes, and their handmade pipes are more freehand on style. I don’t know how many of each they produce annually, though they’re known for their handmade pipes.
LikeLike
As Upshallfan said, good find and very nice grain. If you put that up for sale it should go quickly.
LikeLiked by 1 person
Nice job on that fill.
LikeLiked by 1 person
Thanks Richard. Fills anywhere near stamps still make me a bit nervous! 😀
LikeLike
Nice looking pipe. I hadn’t heard of the Blatter name before your post. Look likes Adam is getting a nice one.
LikeLiked by 1 person
I’ve been trying to find more info about these pipes. Their website isn’t overly helpful. I caught this post the same day it went up; the pipe had already sold. Is there a reason why you remove the selling price when they sell, Charles? I have no idea what these pipes sell for (none for sale on their own site). Glad to read your posts again. I hope you’re recovering well.
LikeLike
Hi David. You’re right. The Blatter site is scant at best. It may be due to Quebec legislation?
I sell through my store, ebay and locally, so actual selling price of a pipe may be different from the asking price. I simplify by removing prices from the store when pipes sell.
LikeLiked by 1 person
I understand. What you sell for is your business. Would it be tacky of me to ask what the original store asking price was on the Blatter? Just for educational purposes.
LikeLike
Thanks for the introduction to Blatter Charles. Beautiful recovery of this pipe, as always. Also, I am pleased to see you working again as I have been sending you many “recovery vibes” over the last few weeks since your operation.
LikeLiked by 1 person
Thanks Johan!
LikeLike
Reblogged this on rebornpipes and commented:
Charles, thanks for the information on the one and two red dot Blatter pipes. I am a fan of their pipes – having two older ones and am always on the look out for more of them.
LikeLiked by 1 person
Thanks Steve. There is precious little information on the Blatter website, though I suspect they would be happy to answer questions via phone or email.
LikeLike
I have two blogs on 3 of my own Blatter pipes. I have some more information on those.
https://rebornpipes.com/2013/05/19/two-of-my-older-blatter-and-blatter-pipes-of-montreal/
https://rebornpipes.com/2015/05/28/cleaning-and-restoring-a-blatter-of-montreal-bent-egg/
LikeLiked by 1 person
Thanks Steve!
LikeLike